







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Ana Homeowners Choose Toto Construction Service
We provide independent Toto construction service in Santa Ana: fixture repairs, full bathroom remodels, walk-in shower installs, and tile work built around Toto toilets, Washlets, and flush systems. We’re not affiliated with or authorized by Toto. What we bring is trade-specific know-how with the brand’s fill valves, flush towers, and skirted trapway geometry, plus written scope and written change orders on every job. Call (888) 325-4971 to schedule a free estimate.
Santa Ana is a city of older homes. Most of the housing stock here went up between the 1920s and 1950s, and a good share of the bathrooms still have the original tile, the original cast iron drain, and a toilet that’s been swapped two or three times. When a Toto goes in, it usually goes into a room that’s already working hard. That’s the reality we plan around.
Why Trust Barrett & Sons Construction Santa Ana for Your Toto Construction?

Our crew members have up to 28 years of experience, and a large chunk of that has been spent in Toto-equipped bathrooms across Orange County. We know the Drake CST743 and CST746 two-piece line well enough to tell you from the symptom which part is likely failing. We know the Ultramax II MS604114CEFG one-piece has a different fill and tower arrangement than the two-piece Drake, and that the skirted base changes how you approach a floor tile replacement. We know the Washlet S550e and C5 seats have inlet filters and nozzle assemblies that behave differently in hard water.
Parts matter. We source OEM Toto fill valves, flush tower seals, and Washlet components whenever they’re available and the cost makes sense, because OEM parts preserve the warranty and fit the way the factory intended. When OEM availability or price is prohibitive, we use vetted aftermarket parts and tell you exactly what we’re installing and why.
Every price change comes to you in writing before work proceeds. Every eligible job gets permits pulled and inspections signed. And the written 90-Day Done Right Promise is on every contract: if something’s not right, one call brings us back. We’re Barrett & Sons Construction, owner-operated since 1998, and we publish our license number so you can look it up before you sign anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Santa Ana
These are the Toto issues we run into most often in Santa Ana homes. Recognizing the symptom saves you a diagnostic visit.
- Ghost flushing on a Toto Drake (CST743/CST746). A toilet that randomly refills for a few seconds when nobody’s used it usually has a worn fill valve diaphragm. The diaphragm loses its seal over time, water seeps past it, the fill valve thinks the tank is low, and it tops off. It’s a small, cheap part, but it wastes water steadily and the sound is annoying at night.
- Continuous running on an EcoFlush model. EcoFlush toilets use a flush tower with a rubber seal at the base. When that seal scales up or tears, water leaks from the tank into the bowl constantly. The tank never sits full, the fill valve runs, and your water bill climbs. Hard water in Santa Ana speeds this up.
- Weak or dead Washlet spray (S550e, C5). The inlet filter on a Washlet clogs with mineral scale, and the nozzle motor can seize from the same buildup. The seat still heats and the controls still light up, so it looks fine until you sit down and get a weak trickle. Santa Ana’s water is on the hard side, so filters need attention more often here than in softer-water parts of the county.
- Hidden leaks at a skirted trapway. A skirted Toto hides the trapway behind the ceramic skirt, which looks clean but makes a floor gasket failure harder to spot. If the toilet was set slightly off-center on install, or the gasket aged out, water can seep under the skirt and stain the floor or the ceiling below before you notice. Pulling and resetting a skirted toilet takes a different approach than a standard one.
- Loose closet bolts and a failing wax ring after a tile job. Whenever a bathroom floor gets retiled, the toilet comes out and goes back in. Old closet bolts strip, the flange sits low after new tile, and the wax ring doesn’t compress right. A toilet that rocks slightly after a remodel is a wax ring waiting to fail.
A common Toto issue in Santa Ana homes is a Drake toilet that runs intermittently or won’t refill after flushing, typically traced to a worn fill valve diaphragm or a scaled flush tower seal. A qualified local pro will shut off the supply, disassemble the tank, inspect the fill valve and flush tower, and replace the faulty component with an OEM-matching part, then adjust the refill level and test for silent leaks. In older bathrooms, the same visit often reveals a failing wax ring or loose closet bolts that are corrected during the repair.
Toto Parts & Our Repair-vs-Replace Approach

Toto toilets are built to last. A Drake or Ultramax II that’s 15 years old and still flushing is not unusual, and the ceramic bowl and tank rarely fail. What fails is the rubber and plastic inside the tank, plus the electronic parts on a Washlet. That’s why we lean toward repair on most Toto fixtures and only recommend a full replacement when the ceramic is cracked, the bowl is beyond cleaning, or the repair cost climbs close to what a new unit would run.
OEM parts come first for fill valves, flush tower seals, and Washlet components. They fit right, they last, and they keep your warranty intact. Aftermarket parts have their place, mostly when an OEM part is backordered or the price gap is large, and we’ll say so plainly when that’s the case. We source parts for each job rather than claiming a local warehouse of stock, so lead time depends on the part. Call (888) 325-4971 for a free estimate and we’ll tell you what your specific model likely needs.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We shut off the supply, pull the tank lid, and inspect the fill valve, flush tower, and flapper area. On a Washlet, we check the inlet filter first, then the nozzle assembly and motor. On a skirted toilet with a suspected leak, we check the floor line and the ceiling below if accessible.
- 2
Repair or install. We replace the faulty component with an OEM-matching part where possible, reset the toilet with a new wax ring and fresh closet bolts when it comes off the flange, and torque everything to spec so a skirted base sits level and flush to the floor.
- 3
Test. We run the toilet through several full flush-and-refill cycles, check the refill level against the manufacturer’s fill line, watch for silent leaks at the base, and run the Washlet through each spray setting to confirm the nozzle moves freely and the filter flows clean.
- 4
Warranty. Every completed job is covered by the written 90-Day Done Right Promise. If a fill valve we installed starts misbehaving or a reset toilet leaks, one call brings us back and we make it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Santa Ana

We work on the Toto lines Santa Ana homeowners actually own. That includes the Drake CST743 and CST746 two-piece toilets, the Ultramax II MS604114CEFG one-piece, and the Washlet S550e and C5 electronic bidet seats. We also service EcoPower and EcoFlush high-efficiency flush systems, including fill valve and flush tower replacement. Beyond repair, we install Toto fixtures as part of bathroom remodeling, walk-in shower installations, and tile and fixture work, so the toilet, shower, and tile all get planned together rather than in separate visits.
If you’re remodeling a Santa Ana bathroom and want to keep a Toto you already own, we can set it back in place on new tile with a fresh wax ring and new closet bolts. If the old toilet is ready to go, we’ll help you think through whether the replacement should be another Toto based on what your bathroom needs.
We Also Service These Brands
We’re not a single-brand outfit. Alongside Toto, we install and service KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows, among other premium brands across the trades we handle. If your project touches more than the bathroom, we can keep the whole job under one written scope instead of handing you off to three different contractors.
FAQs – Toto Construction Service in Santa Ana
No. We’re an independent Toto service provider and we’re not affiliated with, authorized by, or sponsored by Toto. What we bring is experience with the brand’s proprietary parts and a written guarantee on our own work, not a manufacturer badge. Call (888) 325-4971 to schedule a free estimate.
Yes, we prioritize genuine OEM Toto fill valves, flush tower seals, and Washlet components for reliability and to help preserve your warranty. When an OEM part is unavailable or the cost is prohibitive, we use vetted aftermarket parts and tell you exactly what’s going in and why, in writing, before we install it.
Most single-fixture Toto repairs, like a fill valve or flush tower seal replacement, are done in one visit of an hour or two. Washlet diagnostics and repairs can take a bit longer depending on the part needed. A bathroom remodel involving Toto fixtures and new tile runs days to a few weeks, and we give you the timeline in writing before work starts.
We cover the Drake CST743 and CST746 two-piece lines, the Ultramax II MS604114CEFG one-piece, the Washlet S550e and C5 bidet seats, and EcoPower and EcoFlush high-efficiency systems. If you’re not sure which model you have, the model number is usually stamped inside the tank lid or on a label behind the seat.
Not when we use OEM parts and follow the manufacturer’s service procedures, which we do whenever OEM parts are used. Using aftermarket parts can affect warranty coverage on the specific component replaced, so we’ll tell you before we go that route. Call (888) 325-4971 if you want to walk through your warranty situation before booking.
It depends on the job. A single Toto repair is usually a minor line item, while bathroom work involving Toto fixtures runs the ranges below. These are typical Santa Ana ranges, and your written estimate will break out exactly what’s included.
| Service | Typical Santa Ana Range |
|---|---|
| Bathroom Remodel | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Vanity Installation | $800 – $3000 |
Call (888) 325-4971 for an exact quote. Estimates are free, and every price change on a Toto job arrives as a written change order before work proceeds.
Book Your Toto Service in Santa Ana, CA
Whether it’s a Drake that won’t stop running, a Washlet with a weak spray, or a full Santa Ana bathroom remodel with new Toto fixtures and tile, we’ll give you a written scope and a free estimate. Barrett & Sons Construction has been owner-operated since 1998, every eligible job gets permits pulled and inspections signed, and the 90-Day Done Right Promise is on every contract. Call (888) 325-4971 today.
Written by the team at Barrett & Sons Construction Santa Ana.












