A Barrett company - serving Santa Ana, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
K
Kohler · Santa Ana

Kohler Construction Service in Santa Ana, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Ana
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Santa Ana Homeowners Choose Kohler Construction

Barrett & Sons Construction Santa Ana provides independent Kohler service and installation across the city, from cast-iron kitchen sinks and Rite-Temp shower valves to Comfort Height toilets and ceramic shower bases. What makes our Kohler work different is that we treat it as plumbing and construction, not a catalog sale: OEM cartridges when they’re the right call, substrate checked before a new base goes down, and a written change order before any scope moves. We’re not affiliated with or authorized by Kohler. We’re an independent contractor that has handled these fixtures through hundreds of kitchen and bath projects around Orange County, and we know how they behave in Santa Ana homes. Call (888) 325-4971 for a free estimate.

Call (888) 325-4971

Why Trust Barrett & Sons Construction Santa Ana for Your Kohler Construction?

A tile setter installing wall tile in a shower

Our technicians have up to 28 years of experience, and a good share of that has been spent with Kohler fixtures in Orange County. We know which Rite-Temp cartridge fits which valve body, why a Wellworth fill valve starts running after hard water leaves mineral film on the seal, and why a Memoirs shower base fails in a Santa Ana house when it held up fine somewhere else. That’s not trivia. It’s the difference between a repair that lasts and a second call in six months.

We buy OEM-compatible parts for showers and faucets, because aftermarket cartridges can change the temperature response and can cause a warranty problem down the line. For cosmetic parts – a toilet seat, a sink strainer, a bath drain – a quality equivalent is fine and saves you money, and we’ll tell you so.

Every eligible job gets permits pulled and inspections signed. Every scope change gets a written change order before the work happens. Every completed job carries our 90-Day Done Right Promise in writing. You can look up our license before you sign anything, which is exactly what we’d want you to do.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Kohler Construction Problems We Fix in Santa Ana

These are the Kohler issues we see most often in Santa Ana, and the reasons behind them.

  • Rite-Temp pressure-balance cartridges sticking or swinging temperature. You’re in the shower, someone flushes a toilet, and the water goes from comfortable to startling. The pressure-balance cartridge is supposed to prevent exactly that, so when it fails, the cause is usually mineral scale on the cartridge piston. Santa Ana’s hard water accelerates it. The fix is a new OEM Rite-Temp cartridge plus a line flush to clear sediment, and we check the valve body while we’re in there.
  • Cast-iron sink enamel chipping at the drain or rim. Whitehaven and Iron/Tones sinks are built to outlast the house, but enamel chips when a heavy pot lands wrong or someone scrubs with an abrasive pad. Once the enamel opens, the iron underneath starts to rust, and the chip grows. Small chips near a drain can sometimes be refinished; widespread loss on a cast-iron sink usually means replacement is the better spend.
  • Ceramic shower bases cracking or debonding. An Archer or Memoirs base installed over a poorly prepared subfloor will flex, and a base that flexes will crack. This is common in Santa Ana’s slab-on-grade houses where the original 1950s slab wasn’t level to begin with. We check the substrate before we set a new base, because setting a good base on a bad floor just moves the failure forward.
  • Comfort Height toilets running continuously. A Santa Rosa or Wellworth that won’t stop running is usually a fill valve with mineral buildup on the seal, or a flush valve flapper that no longer seats. Both are inexpensive to fix and worth catching early, since a running toilet can add real money to a water bill before you notice it.
  • Original plumbing hiding under a new fixture. Old homes in Lacy, French Park and Wilshire Square often have undersized supply lines or corroded shutoffs behind the wall. The new Kohler valve is fine; the plumbing feeding it isn’t. Better to find that during a planned job than after the wall is closed.

What a Rite-Temp Failure Usually Looks Like

A homeowner notices the shower temperature fluctuating wildly when someone flushes a toilet – a classic sign of a failing Kohler Rite-Temp pressure-balance cartridge. A qualified plumber or remodeler typically shuts off the water, replaces the cartridge with an OEM unit, and flushes the lines to clear sediment. If the valve body is corroded, they may recommend upgrading to a newer pressure-balance or thermostatic valve. In older Santa Ana homes with original plumbing, this job often reveals additional issues like mineral buildup or undersized supply lines that need attention.

Kohler Parts & Our Repair-vs-Replace Approach

A new paver pool deck

We don’t keep a stock of Kohler parts. We source what your job needs – OEM cartridges, valves, trim kits, and compatible replacement parts – which means we’re not pushing whatever happens to be sitting in a truck. That also means the right part is chosen for your specific model, not the closest one on a shelf.

Our repair-or-replace call is honest and it’s usually simple:

  • Under 10 years old: repair is usually the right answer for a Kohler fixture. Cartridges, valves and trim are all replaceable, and the body is sound.
  • Cast-iron sink with heavy enamel loss: replacement generally beats refinishing. A refinish on a cast-iron sink with widespread chipping tends not to hold, and you’ve paid twice.
  • Shower base over a failed substrate: replacing the base without addressing the floor underneath is money spent that won’t hold. We price both together.

If you’re not sure which side of that line your fixture is on, call (888) 325-4971. A free second opinion on any written estimate is one of our standing offers, and we’ll tell you plainly if repair is the better move.

Our Kohler Service Process – Step by Step

  1. 1
    Diagnosis. We identify the exact Kohler model and series where we can – model numbers live under sink rims, inside toilet tanks, and behind valve trim plates – because the right part depends on getting this right. In Santa Ana homes, we also check the water supply and the substrate while we’re diagnosing, since a fixture problem is often a plumbing or floor problem wearing a disguise.
  2. 2
    Scope and written estimate. You get the repair or installation scope in writing, with parts and labor itemized. If we find something behind the wall, you get a written change order before we proceed. No surprise invoice at the end.
  3. 3
    Repair or install. OEM parts for valves and cartridges. Correct substrate prep for shower bases, with permits pulled and inspections signed where eligible. Our technicians have up to 28 years of experience, and they carry the Barrett & Sons name.
  4. 4
    Test. For a Rite-Temp repair, we run a real pressure test – flush a toilet while the shower is running and watch the temperature hold. For a base or tub-to-shower conversion, we check slope, drain flow and seal before we call it done.
  5. 5
    Warranty and 90-Day Done Right Promise. Every completed job is backed in writing. If something’s not right, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Kohler Products We Service & Install in Santa Ana

An open kitchen and dining area after a remodel

We work across the Kohler lines that come up most in Santa Ana homes:

  • Cast-iron kitchen sinks – Whitehaven, Iron/Tones – installation, replacement, and enamel assessment
  • Pressure-balanced shower valves – Rite-Temp – cartridge replacement, valve upgrades, trim
  • Comfort Height toilets – Santa Rosa, Wellworth – fill valve, flush valve, seal, and full replacement
  • Ceramic tile and stone shower bases – Archer, Memoirs – installation, replacement, and substrate repair
  • Vanities and bath fixtures – full vanity installation with plumbing tie-in

Kohler tub-to-shower conversions and walk-in shower installations are two of our most requested jobs in Santa Ana, and both are covered below.

What Kohler Work Costs in Santa Ana

Service Price range
Tub-to-Shower Conversion (Kohler fixtures) $3,500 – $10,000
Walk-In Shower Installation (Kohler base and valve) $4,500 – $12,000
Bathroom Vanity Installation (Kohler vanity) $800 – $3,000
Bathroom Remodel (full, with Kohler fixtures) $9,000 – $28,000

Those ranges hold across Santa Ana, and they’re the same numbers we quote whether you’re in French Park or off Bristol. What moves the price is what we find under the floor or behind the wall. A tub-to-shower conversion in a 1948 bungalow with shallow slab and original drain is a different job than the same conversion in a 1990s tract house, and we price it that way in writing before work starts.

Permits matter more in Santa Ana than in most of Orange County, and that’s a real cost factor. The older core – Lacy, Artesia, French Park, Wilshire Square – sits in historic and conservation districts, so exterior alterations can trigger design review. Santa Ana is one of the few cities in the county where a routine remodel has to factor historic-preservation review into the schedule. We pull the permits and sit through the review, because an unpermitted bath remodel is a problem you inherit at resale.

We Also Service These Brands

Kohler is one brand among several we handle, and that’s deliberate. Kitchens run on KraftMaid cabinetry and Cambria counters. Roofs get GAF and CertainTeed. Windows and doors come from PGT, Andersen and Marvin. Fences go in from Master Halco. You don’t need a different contractor for each trade, and you don’t need us to be a single-brand shop. We choose materials you can look up and verify, not mystery brands off a van.

FAQs – Kohler Construction Service in Santa Ana

Book Your Kohler Service in Santa Ana, CA

Whether it’s a Rite-Temp cartridge that needs replacing, a Whitehaven sink that’s finally chipped too far, or a tub-to-shower conversion with a Kohler base and valve, we’ll give you the scope in writing and a clear number before work starts. Call (888) 325-4971 for a free estimate. A live person answers, day or night. We also honor $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount.

Written by the team at Barrett & Sons Construction Santa Ana.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsulaA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Santa Ana

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Ana team

A local vetted partner works across Santa Ana and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 325-4971
Local Service Coverage

Request a Free Estimate in Santa Ana

Tell us what you need - Barrett & Sons Construction Santa Ana responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch