







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Ana Homeowners Choose PGT Construction
If you own PGT windows, doors, or other PGT-fabricated construction elements in Santa Ana and need them repaired, re-glazed, re-sealed, or replaced, we provide independent PGT construction service across the city. What makes our PGT work different: we treat the unit as a system, not a pane of glass, so a hazy WinGuard window or a slider that won’t latch gets diagnosed to the actual failure point before anyone quotes a replacement. We’re not authorized by PGT and not affiliated with the manufacturer. We’re an independent contractor that installs new PGT units and services existing ones with OEM or equivalent-rated parts.
That independence matters in Santa Ana. A manufacturer-authorized channel will steer you toward a full unit. We compare a replacement IGU against a new PGT sash against a full re-install and tell you which one the opening and the budget actually justify. Call (888) 325-4971 and a live person answers, day or night.
Why Trust Barrett & Sons Construction Santa Ana for Your PGT Construction?

Our technicians have up to 28 years of experience, and a good part of that has been spent on impact-rated fenestration, the category PGT built its reputation on. PGT WinGuard aluminum and vinyl units carry specific impact ratings and specific hinge, latch, and roller hardware. Get the details wrong and you don’t just have a leak, you have a window that no longer meets the rating its label claims.
We service PGT but we don’t guess. Before we recommend an IGU swap on a WinGuard slider, we confirm the unit’s original impact rating, match the replacement glass and hardware to it, and keep the paperwork clean. Every eligible job carries permits pulled and inspections signed, and every price change arrives as a written change order before work proceeds. No surprise invoices, no allowance that wasn’t on paper.
Barrett & Sons Construction is owner-operated. This isn’t a franchise dispatching strangers to your door. The crew members who show up on a Santa Ana job carry our name, and the work is backed by the written 90-Day Done Right Promise: if it’s not done right, you make one call and it gets made right. Our standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside Orange County, and a permanent 10% Senior & Veteran discount.
We work PGT alongside KraftMaid, Kohler, GAF, and Master Halco. That matters because a PGT window service often turns into GAF roof repair after a wind event, or a Master Halco fence line that came down in the same storm. You don’t need three contractors for one afternoon’s work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Santa Ana
PGT builds a strong window. What we see fails is the seal, the hardware, and the weather detailing around the frame, not the vinyl extrusion itself. Here’s what that looks like in practice:
- Failed or fogged insulated glass units (IGUs) on WinGuard impact windows. The seal between the two panes breaches, moisture gets in, and you see haze or condensation between the glass. It’s a cosmetic problem on the surface and a serious one underneath, because a breached IGU loses impact rating. A PGT window that held up in a wind event five years ago may not hold up now if the IGU seal has failed and nobody caught it.
- Worn tilt-latch, sash-lock, and roller hardware on WinGuard single-hung and sliding units. This is the most common service call we get. The sash won’t seat, won’t latch, or won’t slide without a fight. Rollers flatten and seize over time, and latch hardware wears where it’s used daily. A slider that won’t latch isn’t just inconvenient, it’s a security and weather problem in the same call.
- Water intrusion at the sill pan and corner welds on vinyl frames. On older PGT vinyl installations, neglected sealant and blocked weep holes let water sit against the sill. Over years, that water finds the corner welds and works its way in. Santa Ana’s inland heat makes the sealant failure worse, because the material bakes and cracks faster here than it does near the coast.
- Rotted or corroded framing and damaged impact glazing after wind events. Santa Ana wind events are a real pattern in this city. Sometimes the glass holds and the frame and weather seal don’t. We see PGT units where the impact glazing did its job and the framing detail behind it is what failed.
- Hardware mismatch on a previously serviced unit. When a prior repair installed standard aftermarket latches or rollers on a WinGuard unit, the fit can look fine and perform wrong. We check whether the hardware matches what the unit actually needs, because a handyman-grade part on an impact-rated window can leave the sash not fully seating.
PGT Parts & Our Repair-vs-Replace Approach

Replacement IGUs, sash hardware, and rollers should match the PGT unit’s original impact rating. On a WinGuard window, that’s the whole reason you bought it. We prefer OEM PGT parts or a quality equivalent-rated part where available. For non-structural hardware like locks and rollers, standard aftermarket parts are fine when they fit and function correctly, and we’ll say so instead of upselling you to factory parts you don’t need.
Our rule of thumb: a failed IGU or a single broken sash on an otherwise sound PGT frame is usually worth repairing. Cracked corner welds, rotted framing, or repeated glass failures on the same unit push toward full replacement, because you’d be spending money on parts for a frame that’s already past it. We source parts for each job rather than carrying an inventory, so we’ll tell you what’s actually obtainable and how long it takes before we quote you. Call (888) 325-4971 for a free estimate and an honest read on which way your PGT unit should go.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the specific PGT unit and series, confirm its impact rating, and inspect the glass, hardware, sill pan, and corner welds. Fogging gets traced to whether the IGU seal failed or water is getting in from the sill.
- 2
Scope in writing. You get a line-item estimate: the parts, the labor, and a written change order for anything that shifts. Allowances are on paper before work happens.
- 3
Repair or install. A re-glaze, hardware swap, or new PGT unit set into the existing opening and trim, with sealant and weep detailing done correctly for Santa Ana’s inland heat.
- 4
Test and inspect. Slide, latch, and operate every unit we touched. On eligible work, permits are pulled and inspections signed, because the inspector works for you.
- 5
Warranty. The completed job is backed by the 90-Day Done Right Promise in writing, plus the manufacturer warranty on any new PGT parts installed.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Santa Ana
We work across the PGT lines most common on Santa Ana homes: PGT WinGuard Impact-Resistant Aluminum Windows, PGT WinGuard Vinyl Single-Hung and Sliding Windows, PGT Premier Series Vinyl Windows and Patio Doors, and PGT Aluminum Series Custom Windows and Doors. That covers the impact-rated aluminum and vinyl units we see throughout the city’s 1920s – 1950s bungalows and post-war tracts, the vinyl single-hungs and sliders on residential additions and garage conversions, and the custom aluminum work on homes that need a specific size or profile. We service and repair all of them, and we install new PGT units when the frame is past repair.
We Also Service These Brands
PGT is one line we know well, not the only one. We install and service KraftMaid cabinetry, Kohler fixtures, GAF roofing, and Master Halco fencing. If a PGT window service turns up a failed roof line after the last wind event, or a fence that needs replacing in the same project, you’re not looking for a second contractor to finish the job.
FAQs – PGT Construction Service in Santa Ana

Can a fogged PGT WinGuard insulated glass unit be re-glazed instead of replacing the whole window? Yes. A fogged WinGuard IGU is usually a failed seal between the panes, not a frame failure, so re-glazing with a replacement unit that matches the original impact rating is often the correct and less expensive repair, provided the frame is otherwise sound. Call (888) 325-4971 for a free estimate.
Why won’t my PGT sliding window latch or slide smoothly anymore? Worn rollers and sash-lock hardware are the usual cause on PGT sliders. The roller flattens or seizes and the sash no longer sits square enough for the latch to engage. The fix is usually a hardware replacement rather than a new window, and a technician can confirm it on a service visit.
Does a PGT impact window need special handling when the glass is replaced? Yes. Any replacement IGU or sash on an impact-rated PGT unit has to match the original impact rating. Installing a standard, non-rated pane into a WinGuard frame drops the unit below its rated performance, which is a code and insurance concern, not just a quality one.
Can water coming in around a PGT vinyl window be fixed without a full window replacement? Often, yes. Most water intrusion at a PGT vinyl window traces to failed sealant, blocked weep holes, or a compromised sill pan rather than the frame itself. If the corner welds are cracked or the framing is rotted, that pushes toward replacement, and we’ll tell you plainly which one your unit needs. Call (888) 325-4971 for an honest assessment.
Do you install new PGT windows as well as repair existing ones? Yes. We install new PGT windows and doors alongside repairing existing units, and our technicians have up to 28 years of experience with impact and standard window installation.
How much does PGT construction cost in Santa Ana? The ranges below reflect typical market pricing in Santa Ana. Every job gets a written line-item estimate, and a free second opinion on any written estimate you’ve already received.
| Service | Typical Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Call (888) 325-4971 for an exact quote on your PGT window or roof work. Estimates are free.
Book Your PGT Service in Santa Ana, CA
A hazy PGT WinGuard window, a slider that won’t latch, or a frame taking on water is a repair that gets worse with time and wind. We’ll diagnose the actual failure, quote it in writing, and back the work with the written 90-Day Done Right Promise. Call (888) 325-4971 for a free estimate on your PGT construction service in Santa Ana.
Written by the team at Barrett & Sons Construction Santa Ana.












